Oklahoma Custom Coating, LLC    1801 Boren Blvd.    Seminole, OK 74868
Phone: (405) 382-0231   Fax: (405) 382-5026  lee@okcustomcoating.com
PowerCron 590-534 PowerCron 590 Product Data Sheet Product Data Sheet (PowerCron 590) Oklahoma Custom Coating, LLC utilizes a seventh generation cathodic epoxy technology, specifically formulated to be lead and chrome free.  This product, also know as PowerCron 590, is universally recognized by automotive OEM’s.  PowerCron 590 provides maximum corrosion performance coupled with limited environmental impact, and exceptional operational cost effectiveness.  Advantages of this coating are very limited solvent use and low volume of effluent discharge.  End uses include auto accessories, switchgear, computer components, marine applications, trailer components, radiators, air conditioning coils, food appliances, medical devices, automotive components, rail road, mining, electric / hydraulic motors, etc. POWERCRON 590 FILM PROPERTIES                         Property                            Test Method           Performance        _____________________________________________________________________ Color                                   -----                    Black, Earthtones Film Thickness                      -----                    0.4 - 1.2 mils        Gloss-60 Degree                ASTM D523-89        65 - 85%              Pencil Hardness                 ASTM D3363-00      2H Minimum                    Direct Impact                    ASTM D2794-93       120 in-lb Minimum   Reverse Impact                 ASTM D2794-93       100 IN-LB MINIMUM              Cross-Hatch Adhesion        ASTM D3359-97       4B - 5B Humidity                           ASTM D1735-99       1000 Hours Minimum    Gravelmeter                     ASTM D870-97         Minimum        Throw Power                     GM 9535P               12-15 inches    APPLICATION DATA Bake:                    20 Minutes at 375° F, (191° C) Metal Temperature Weight Loss:          13% (20 Minures at 375° F) VOC:                     0.4 - 0.6 lbs. Per Gallon, Minus Water (as supplied) HAP's:                   0 - 0.1 lbs. Per Gallon (as supplied) Heavy Metals:         None ___________________________________________________________________________________________________________ Cold Rolled Steel Lab Panels, Zinc Phosphate Pretreatment 0.6 Mil Average Film Thickness, Cure 20 Minutes @ 375° ___________________________________________________________________________________________________________                 CORROSION RESISTANCE CHART Substrate/Pretreatment                Salt Spray*    Salt Spray*    20 Cycle**                                                   500 Hours      1000 Hours     Scab CRS/Zinc Phos/Chrome                   0 mm          0-1mm           1-2mm CRS/Zinc Phos/Non-Chrome            0 mm          0-1mm           1-2mm CRS/Zinc Phos/DI Water                 0-2mm        1-4mm            3-5mm CRS/Iron Phos/Chrome                   0-1mm        2-4mm           2-4mm CRS/Iron Phos/Non-Chrome            1-3mm        2-5mm            10-14mm CRS//Iron Phos/DI Water                2-9mm        10-15mm        13-15mm CRS/Untreated                               5-10mm       14-18mm        0-2mm (Average Total Scribe Creep), *Salt Spray - ASTM B117-97  **Cycle Scab - GM9511P, Cold Rolled Steel Lab Panels - Cure 20 Minutes @ 375 Deg. F. PowerCron 590-534